# Finite State Machines#

Finite State Machines (FSM) are often used while programming in order to allow for more complex series of actions. This is especially useful when one needs multiple tasks to run at the same time, because it allows for tasks to depend on each other’s execution in a non-linear fashion.

## What is a Finite State Machine?#

The name of a finite state machine is very descriptive; it’s a state machine, with a finite number of states. It can be in one state at a time, and can transition to a different state once something happens. For example, see the example of a finite state machine that’s on Wikipedia because a turnstile is a great example, and it is explained very well.

## Implementation#

### Naive Implementation#

When first learning about FSMs, it is quite common for programmers to try and use them. Often times, they try to apply an FSM to their autonomous programs by segmenting their autonomous into a giant switch statement, and it often looks something like this:

while (opModeIsActive()) {
switch (state) {
case DETECT_SKYSTONE:
// skystone detection code here
int position = detectSkystone();

if (position == 0) {
state = SKYSTONE_POS_0;
} else if (position == 1) {
state = SKYSTONE_POS_1;
} else {
state = SKYSTONE_POS_2;
}
break;
case SKYSTONE_POS_0:
// skystone position 0 here
doSkystone(0);
state = MOVE_FOUNDATION;
break;
case SKYSTONE_POS_1:
case SKYSTONE_POS_2:
// etc etc
break;
case MOVE_FOUNDATION:
// foundation move code
state = PARK;
break;
case PARK:
// park the bot
break;
}
}


This however does not really have any benefits compared to if the programmer had simply put each of the code’s segments into functions, and executed them in order. In fact, often times, programmers will structure their code like this instead of splitting their code up into functions. The result is an autonomous that’s more difficult to debug, and ultimately harder to fix on the fly during a competition or other time crunch.

If one drew out the state transition diagram for each of the states, for the autonomus above it’d be very linear, and the state transitions always occur because the section of the code finished:

In fact, in many implementations, making state transitions for any other reason is often difficult because the code executes linearly and is only in a loop to rerun the switch statements. (Often times, this means the code has a hard time reacting to a stop request in the middle of autonomous.)

Warning

It is unadvisable to write code like this. If your autonomous is synchronous, it is preferable to split your code up into functions and run them in order, as this will be easier to understand and edit on the fly.

### Useful Implementation#

FSMs are the right tool to use when a robot needs to complete multiple tasks at once; a common example of this is when a robot should have automation in teleop, but still have control over the drivetrain.

Often times, teams have issues because their teleop executes in a loop and their servo logic has sleeps in it. But, we can avoid this if we write code in an asynchronous fashion - where instead of waiting for a task to complete before doing the next one, tasks are performed at the same time, and each task’s state is checked without stopping the other tasks from executing.

An example of this would be that if one had a robot similar to Gluten Free’s Rover Ruckus Robot, and one wanted to automate the scoring lift so that the drivers don’t have to think while the bot deposits the minerals. There are two parts of the bot that are relevant to us in this exercise: the angled scoring lift, and the servo that tips the dumper so the minerals fall out. The goal is to be able to push a button, and then the bot will:

• extend the lift,

• at full lift extension, angle the mineral bucket servo to deposit the minerals,

• wait for the minerals to fall out,

• reset the servo to the original position

• retract the lift

If the drivers press a specific other button, we will stop executing the actions above as a failsafe - in case the robot is breaking somehow and the drivers need to take manual control. All the while, the drivers should still be able to control our drivetrain so we can make adjustments. Now, of course, this is a bit simplified (and probably not entirely what GF did), but it will do for now.

Before anything is programmed, it may be useful draw out the state diagram for this to get a better understanding of what we the robot should actually be doing. This can also add to a submission.

Notice how resetting the dump servo and retracting the lift share a state. That’s because the robot doesn’t need to wait for the servo to reset before moving the lift down; they can both happen at once.

Now, let’s get into actually implementing the code for this. In a traditional OpMode, which is commonly used for teleop, code runs repeatedly in a loop() function, so instead of waiting for a state transition to happen directly, the code will repeatedly check on each loop() call if it should perform a state transition. This kind of “update our state” pattern keeps code from blocking the rest of the loop() code from running, such as the drivetrain.

/**
- Some declarations that are boilerplate are
- skipped for the sake of brevity.
- Since there are no real values to use, named constants will be used.
*/

@TeleOp(name="FSM Example")
public class FSMExample extends OpMode {
// An Enum is used to represent lift states.
// (This is one thing enums are designed to do)
public enum LiftState {
LIFT_START,
LIFT_EXTEND,
LIFT_DUMP,
LIFT_RETRACT
};

// The liftState variable is declared out here
// so its value persists between loop() calls
LiftState liftState = LiftState.LIFT_START;

// Some hardware access boilerplate; these would be initialized in init()
// the lift motor, it's in RUN_TO_POSITION mode
public DcMotor liftMotor;

// the dump servo
public Servo liftDump;
// used with the dump servo, this will get covered in a bit
ElapsedTime liftTimer = new ElapsedTime();

final double DUMP_IDLE; // the idle position for the dump servo
final double DUMP_DEPOSIT; // the dumping position for the dump servo

// the amount of time the dump servo takes to activate in seconds
final double DUMP_TIME;

final int LIFT_LOW; // the low encoder position for the lift
final int LIFT_HIGH; // the high encoder position for the lift

public void init() {
liftTimer.reset();

// hardware initilization code
}

public void loop() {
switch (liftState) {
case LiftState.LIFT_START:
// Waiting for some input
// x is pressed, start extending
liftMotor.setPosition(LIFT_HIGH);
liftState = LiftState.LIFT_EXTEND;
}
break;
case LiftState.LIFT_EXTEND:
// check if the left has finished extending,
// otherwise do nothing.
if (Math.abs(liftMotor.getPosition() - LIFT_HIGH) < 10) {
// our threshold is within
// 10 encoder ticks of our target.
// this is pretty arbitrary, and would have to be
// tweaked for each robot.

// set the lift dump to dump
liftDump.setPosition(DUMP_DEPOSIT);

liftTimer.reset();
liftState = LiftState.LIFT_DUMP;
}
break;
case LiftState.LIFT_DUMP:
if (liftTimer.seconds() >= DUMP_TIME) {
// The robot waited long enough, time to start
// retracting the lift
liftDump.setPosition(DUMP_IDLE);
liftMotor.setPosition(LIFT_LOW);
liftState = LiftState.LIFT_RETRACT;
}
break;
case LiftState.LIFT_RETRACT:
if (Math.abs(liftMotor.getPosition() - LIFT_LOW) < 10) {
liftState = LiftState.LIFT_START;
}
break;
default:
// should never be reached, as liftState should never be null
liftState = LiftState.LIFT_START;
}
}

// small optimization, instead of repeating ourselves in each
// lift state case besides LIFT_START for the cancel action,
// it's just handled here
if (gamepad1.y && liftState != LiftState.LIFT_START) {
liftState = LiftState.LIFT_START;
}

// mecanum drive code goes here
// But since none of the stuff in the switch case stops
// the robot, this will always run!