The REV kit is an infinite-pitch, extrusion based building system which uses the metric system and M3 hardware.
The REV system uses metric dimensions (15 mm extrusion, M3 hardware), with the exception of #25 roller chain (FTC standard, imperial).
REV has purposefully designed with compatibility in mind, as pattern adapters ease compatibility issues.
Many REV parts are made of Delrin, a high-wear resistance plastic, which reduces overall cost. However, REV offers aluminum options for high-load parts as well.
REV does have a steeper learning curve than channel based build systems, owing to the fact that constructing structurally sound mechanisms requires just a little more thought.
REV’s bread and butter is the 15x15mm aluminum extrusion. It accepts M3 hex screws which slide along the grooves.
REV also offers punch tubing for teams wanting a more permanent mounting system while having the flexibility of extrusion.
REV uses 5 mm hex steel shafts and a ball-bearing motion support system. The shaft may be cut to length, which can be very useful for certain use cases. Many vendors have added compatibility to 5 mm hex shaft.
REV offers 3 types of HD HEX motors: spur gear, planetary, and UltraPlanetary motors. The UltraPlanetary has customizable planetary ring gear ratios for a very affordable price.
The Core Hex Motor may be useful in certain use cases such as space constrained mechanisms.
REV also has pattern adapters for other systems built into many parts such as the aluminum brackets.
The REV kit is good for teams willing to invest the time into an extrusion building system. It is the most flexible kit as it is extrusion based, yet it has the ability to integrate channel along with extrusion. REV offers the option to upgrade parts for those wanting a further investment into the REV building system.
One advantage to the REV kit is the compatibility of 15x15mm MiSUMI extrusion.
15x15mm REV extrusion isn’t as structurally strong as MiSUMI for two reasons.
REV extrusion is 6063 aluminum, while MiSUMI extrusion is made out of A6N01SS-T5 aluminum, a stronger and stiffer alloy.
The MiSUMI extrusion has a larger surface area, so there is more area of contact.
MiSUMI offers greater strength at a lower bulk cost. Additionally, MiSUMI will cut to the half millimeter for free, making it a great option for teams needing an exact cut. The drawback to MiSUMI is that it is quite a bit heavier than the REV extrusion. It is encouraged that teams use MiSUMI for drivetrain and structural support, and REV for mechanisms that will be under low to medium load.
REV also sells punch tubing, which is 15 mm aluminum square tubing that is compatible with 1/8” rivets. This will prevent bolts from loosening or sliding around, as punch tubing requires teams to drill through the tubing in order to fasten parts to it. Another easy option is to use REV 45x45mm channel.
Extrusion systems don’t need to worry about tensioning as mounts are adjustable to your needs.
Extrusion allows infinite positioning options instead of being locked in to a specific distance - useful for fine-tuning a mechanism.
Delrin products are inexpensive yet durable for most use cases.
REV has the option to upgrade to aluminum parts if need be - something that no other build system offers. (not for all parts)
Punch Tubing is a great final iteration option if you are sure about placement.
Channel complements extrusion extremely well - having the adjustability of extrusion and the rigidity of channel makes it a very solid build system.
Generally, REV products are designed with affordability in mind, and so the components are of good value for money.
Steeper learning curve, more time consuming to measure and cut extrusion to length.
Requires tools such as a saw and bandsaw.
Requires forethought and planning of extrusion length and placement.
Parts loosen over time (to remediate: use punch tubing)
M3 bolts, especially those sold directly by REV, are prone to bending under higher load (such as when used as an axle for a pulley)